Business is booming.

Galaxy S9 Touch Screen Not Working Issue After Android 9 Update

There are many Samsung phones whose screen stops working after a new update. Galaxy S9 touch screens not working after Android 9 update, you asked?

Suppose the touchscreen on your Samsung Galaxy S9 begins to malfunction after an update is done. This might be a symptom of a software issue, mainly if the problem started without any apparent cause or explanation.

If that’s the case, you don’t have to bring your phone to the store to repair it yourself.

The touchscreen on your Galaxy S9 has stopped functioning, and I’ll show you how to fix it in this article!

We’ll go over every possibility and see if we can get the screen to reply once more once we’ve eliminated everything else.

If you’ve tried everything and the touchscreen still doesn’t function, it’s time to take your phone to a repair shop.

Galaxy S9 Touch Screen Not Working Issue After Android 9 Update

When it comes to hardware issues, it’s best to get assistance from a specialist; when it comes to firmware issues, however, it’s best to try to solve it yourself without the aid of an expert.

Read More: Galaxy S6 Touch Screen Calibration: Here’s How To Do It

It’s also possible to repair your Galaxy S9’s touchscreen by following these steps…

First solution: Force restart your Galaxy S9

A bug in the firmware probably is to blame for the issue.

Even while they seem to be significant hardware issues, they are relatively small and may be fixed even with this approach…

Galaxy S9 touch screen not working

  1. Keep pressing and holding the Volume Down button.
  2. Press and hold the volume button while simultaneously pressing and holding the Power button.
  3. For 15 seconds or until the Galaxy S9 logo appears on the screen, hold down both keys simultaneously.

It is essential to check whether you can swipe up on the screen after a successful reboot since if the touchscreen is still broken, the following process must be followed.

Second solution: Restart your phone in Safe mode

Third-party programs might create faults or inconsistencies with the firmware, leading to troubles like these.

In this case, we need to isolate the issue and see if we can get the touchscreen to react.

  1. Even if your touchscreen isn’t functioning, you can still boot into safe mode by doing the following steps:
  2. Keep pressing and holding the Volume Down button.
  3. Press and hold the volume button while simultaneously pressing and holding the Power button.
  4. Hold down the volume down button until you hear a vibrating sound and the phone boots up.
  5. In safe mode, the device will continue to power up.
  6. After a few minutes in this mode, check whether the issue has been resolved before moving on to the following approach.

Third solution: Bring your phone to the store or shop

If your phone’s touchscreen isn’t functioning, there’s no way to continue debugging it.

Even in recovery mode, you cannot turn it off and on again. Since this is a hardware issue, the only thing you can do is bring your device back to the store or shop so that an experienced technician can diagnose and fix the problem.

Read More: Galaxy S6 Touch Screen Not Working After Water Damage | Here’s How To Fix It

In this case, please wait until the phone shuts down on its own before trying the master reset to check whether the touchscreen works.

Here’s how to do it on the phone with a broken touchscreen:

  1. Allow the phone’s battery to drain completely.
  2. Make sure the battery is fully charged before reactivating the device.
  3. Press and hold the Volume Up and Bixby buttons, then press and hold the Power button.
  4. Let go of all three buttons when the Galaxy S9 logo appears onscreen.
  5. The recovery mode of your Galaxy S9 will continue to start up. Continue to the following step when you see a black screen with blue and yellow writing.
  6. Select ‘wipe data/factory reset by pressing and holding the Volume Down critical multiple times.
  7. Select by pressing the Power button.
  8. It would help to press the volume down button until the word “Yes” appears.
  9. Select and begin the master reset by pressing the Power button.
  10. Once a master reset has been completed, the option to “Reboot system immediately” appears.
  11. Restart the device by pressing the Power key.

This operation will remove all of your files and data. We apologize for the inconvenience. There is no other way to prevent this. Even if this doesn’t fix the touchscreen problem, it’s time to take the phone for repair.

If your Galaxy S9’s touchscreen isn’t functioning, I hope this guide was helpful. Please share this article if you found it useful and would want to help us get the word out. I appreciate you taking the time to read this.