Do you want to know how to charge the galaxy s5 with a broken charging port? The waterproof Galaxy S5 is an excellent waterproof and dust-proof gadget. It is one of the most popular phones on the market.
Unfortunately, the charging port cover is this phone’s, Achilles Heel. Fortunately, you can repair the charging port flap for about $5 and 5 minutes of your time.
If you possess a Samsung Galaxy S5, you may be wondering how to solve the Galaxy S5 charging port not working.
Some Galaxy S5 owners assumed that the USB cord was the problem and went out and bought a new charger, however there are some easy fixes that we’re about to recommend on how to typically solve the charging port not working.
The following are some of the other most typical causes of the Samsung Galaxy S5 charger not functioning problem:
Connectors on the gadget or battery that have been bent, damaged, or forced in.
The phone is faulty.
Battery has been damaged.
A faulty charging device or cord
Temporary phone malfunction.
The phone is faulty.
Poking holes in your umbrella during a thunderstorm is akin to leaving your Galaxy S5 exposed. Not wise. 5 dollars and 5 minutes later, you’re as good as new.
Follow the steps outlined in the video:
1) Take off your phone’s back cover.
2) Look for a little silver Philips head screw at the phone’s base, near the charging port lid.
3) Take out the screw.
4) Raise the tiny plastic door.
5) Make an effort to keep the black tape intact. It aids in the preservation of waterproofing.
6) Remove the previous charging port flap (Or what’s left of it anyway.)
7) Insert the replacement charging port flap.
8) Cover the reused black tape with a plastic screw hole piece.
9) Return the Philips head screw to its original position.
10) You’re finished!
Please let me know if you have any more queries!
What are your thoughts? Are charging port flaps beneficial? Is it a necessary evil or a horrifying design flaw?
Samsung Galaxy S5 Charging Port Not Working
When the Samsung Galaxy S5 is not charging correctly, the first thing to check is the charging cord.
Sometimes the charger cable is broken or loses the correct connection to charge the Galaxy S5.
Before purchasing a new cable, try replacing it with another USB cable that works to check whether the problem is with the cable.
If the other USB cable charges the Galaxy S5, consider purchasing a new Galaxy cable charger here.
Clean USB Port
Another typical cause of the Samsung Galaxy S5 not charging through USB is that something is obstructing the connection to the smartphone. The connection might be broken due to debris, dirt, or lint.
To get everything out of the USB charging port, insert a little needle or paper click and slide it about.
When the Samsung Galaxy S5 does not charge correctly, this is usually the cause.
However, when cleaning the USB port, take care not to harm anything and wipe it carefully.
Reset Samsung Galaxy S5
The Galaxy S5 may not charge when plugged in because the software requires a reset.
This approach may just be a temporary solution, but it does assist to resolve the Galaxy S5 charging issue. Read the complete instructions here.
Get Help from an Authorized Technician
If none of the above techniques resolve the Samsung Galaxy S5 not charging issue, another option is to take the smartphone to a Samsung expert.
If the smartphone is in need of repair, they may be able to supply a replacement under the warranty.
Samsung Galaxy S5 Micro-USB Port Daughterboard Replacement
Step 1: Back Case
In the indentation to the left of the rear-facing camera, insert a fingernail or plastic opening tool.
Gently peel and twist the phone’s flexible back cover off.
Step 2: Install the battery
Insert a fingernail or plastic opening tool into the battery’s bottom right corner recess and pull upward.
Take the battery out of the phone.
Step 3: Insert a MicroSD card
Pull the microSD card straight out of its slot with your fingertip.
Remove the phone’s microSD card.
4th Step: SIM Card
To remove the SIM card, follow the steps outlined above.
Step 5: Display Construction
Pry up the plastic midframe connection panel using a plastic opening tool.
Using tweezers, remove the connecting panel.
There should be enough glue to reattach the panel, but if not, apply a little bit of double-stick tape.
Pry the home button cable connector straight up out of its socket with the pointed tip of a spudger.
In the steps that follow, you will use an iOpener to warm the glue that holds the display component to the rest of the phone. This will make screen removal safer and easier. Follow our iOpener heating guide and pay attention to all cautions for optimal iOpener use.
Place a heated iOpener on the phone’s left side for at least 90 seconds.
Reheat the iOpener and put it on the phone’s right side.
In the next stages, you will use an opening pick to remove the glue that is holding the front panel glass in place. Only pry when instructed. Stop moving the opening pick and reapply heat if you encounter resistance.
Insert the bottom right side of the front glass with the edge of an opening pick.
Slide the opening pick up along the display’s right side.
Slide the pick carefully around the corner, stopping just before the speaker grille at the top of the phone.
The glue that secures the phone’s top is simply a short strip over the earpiece speaker. To avoid harming internal components, slide the pick along the top of the speaker.
Slide the opening pick across the top of the phone, taking care not to insert it too far.
Slide the pick carefully around the upper left corner.
If you find any cooling adhesive resistance, reapply a hot iOpener to the left side of the phone.
Slide the opening selection down the left part of the phone until it reaches the bottom left corner.
Slide the opening pick all the way to the phone’s bottom left corner, making sure it is firmly in place.
In the next stage, you’ll place an iOpener over the phone’s home button end; you don’t want your opening selection to fall out.
Slide the opening pick all the way to the bottom left corner of the phone, making sure it is securely placed.
In the following step you will be placing an iOpener over the home button end of the phone, you won’t want your opening pick to slip out.
Place a warmed iOpener over the display assembly’s bottom section.
Because there are fragile components in this area of the phone, you should make sure the adhesive is warm and simple to detach in order to safeguard the phone.
The soft button and home button ribbon cables are located at the phone’s bottom. You risk severing these cables if you insert the opening pick too deep into the phone.
To separate the remainder of the leftover glue, slide the very end of the opening pick across the bottom edge of the display.
Detach the glass from the phone by twisting the opening pick.
If the front panel does not easily release, extra adhesive cutting may be required.
If the front panel is difficult to remove, the glue on the soft button cable may need to be detached.
Because these wires are delicate and easily damaged, be sure you are merely pulling them away from the display assembly and not lacerating them.
Insert an opening pick under the display’s soft button icons and pull the button wires down from the interior of the front panel.
Lift but do not remove the display assembly’s home button end.
Do not remove the front panel fully. It is still connected through a connection.
When reusing the home button flex cable, take care not to sever it from the home button. The wire might pull away from the home button due to adhesive. The home button will continue to function, but the fingerprint scanner will not.
Lift the front panel assembly cable connector straight up from its socket on the motherboard using the pointed tip of a spudger.
Remove the front panel assembly from the phone in a safe manner.
If your replacement display did not arrive with a home button, you may move your old button to the new display or install a new button by following our Home Button Assembly instructions.
Step 21: Interior Midframe Assembly
Remove the ten 3.4 mm Phillips #000 screws from the midframe’s display side.
Turn the phone over and remove the following screws from the midframe’s battery side:
Two 4.4 mm Phillips #000 screws at the USB port on the phone’s battery side
1 Phillips #000 screw (4.4 mm)
To separate the three white plastic clips, gently run a plastic opening tool down the left inner edge of the inside frame.
The midframe is divided into two sections that house the motherboard.
To separate the two portions of the midframe, gently pull the long edges of the silver bezel away from the phone.
Gently push in from the inside of the battery compartment, but be cautious not to stretch the inside half of the midframe, as the motherboard is attached to it.
Pull away from the internal piece of the midframe to separate the two sections on the right side of the silver bezel.
Pry any remaining corners out of the silver bezel using a plastic opening tool.
Remove the inside midframe/motherboard component from the white inner midframe with care.
Step 28: Assemble the Motherboard
Insert the tip of a spudger carefully beneath the antenna cable connection.
Lift the spudger gently upwards to remove the antenna connection from its socket on the motherboard.
Some variants come with two antenna cables (one blue and one grey/white). Take out both cords.
Take off the single 3.0 mm Phillips #000 screw that holds the motherboard to the midframe.
Pull the camera end of the motherboard up from the midframe to have access to the connections on the back.
Do not attempt to completely remove the motherboard since the Micro-USB port daughterboard connector is still linked to the internal midframe.
Pry the daughterboard connector straight up from its socket on the motherboard with the flat end of a spudger.
Step 32: Micro-USB Port Daughterboard
The soft button ribbon wires, which are connected to the Micro-USB port daughterboard, must be removed from the inside midframe.
Carefully pull the soft button cables up from the internal midframe with the flat end of a spudger.
Return the midframe/motherboard assembly to its original position.
Remove the single 2.5 mm Phillips #000 screw that has been used to secure the Micro-USB port daughterboard to the midframe.
Slide the flat end of a spudger between the daughterboard cable and the inner midframe to begin separating the glue that is keeping it in place.
Replace the spudger between the daughterboard and the internal midframe after rotating the midframe/motherboard assembly.
Twist the spudger to remove the remaining glue between the daughterboard and the internal midframe.
Remove the inside midframe’s daughterboard.
How To Charge Galaxy S5 With Broken Charging Port?
How much does it cost to repair the charging port on a Galaxy S5?
Depending on your model and service, professional Samsung charging port repair will cost between $50 and $90. Check to determine whether your repair company provides guarantees on components and labour.
With a broken port, how can I charge my Samsung?
- Ascertain that the problem is caused by the charging port.
- Clean the charging port on your phone.
- Consider wireless charging.
Take out your battery and massage it in your palms (emergency fix)
Use household batteries to charge your phone’s battery (emergency fix)
What should I do if my phone charging port is damaged?
Examine the cord as well as the connection. If you see any damage, it’s time to get a new Lightning Cable.
If there is no obvious damage, consider using your computer as a charger by connecting your iPhone to the Lightning Cable, then plugging the cable into the USB connection on your computer.
Samsung Galaxy S5 Charging Solution Jumper Problem Ways
Charging issues with the Samsung Galaxy S5 might be caused by a damaged charging pin or by water damage. In the event of a charging malfunction, the mobile cannot preserve power in the battery and may display false charging. In a false charging situation, you will just see a charging single in your phone, but it will not save any electrical power.
Ways to Solve the Samsung Galaxy S5 Charging Issue Jumper Problem[/caption] Samsung Galaxy S5 Charging Solution Jumper Issue Charging Methods Not Supported
After disassembling your phone, follow the instructions outlined in the figure above. how to charge galaxy s5 with broken charging port
Check the charging jack and its points to see whether they are of high worth. If so, change the charger and examine it; if the charging points on the motherboard do not show an accurate value using a meter, you must inspect all of the parts and tracks are shown in the picture of the Samsung Galaxy S5.
Examine the motherboard carefully to see if there is any rust, carbon, or water damage, or if any component is damaged.
If any track is missing, use the provided jumpers, and if any part is damaged or broken, replace it with a new one.
Keep returning this page for additional information and fresh tips and tricks regarding this problem solution; we will update it if there are any new changes. Some relevant posts are also included below so that you may learn more about mobile phones.
Please keep in mind that, while every diagram and solution on our website has been tested by one or more members of our staff before being uploaded, we will not be held liable for any loss or damage, including personal harm. You should use these repair solutions at your own risk.
How To Fix The Samsung Galaxy S5 Slow Charging and Not Charging Issue?
Solution No. 1:
Before proceeding, I strongly advise you to check to see whether your Samsung Galaxy S5 has been damaged by heat!
Above all, check that you are using a unique charger because charging devices of various manufacturers may have different voltage settings and may cause your Samsung Galaxy S5 to not charge legitimately.
Connect your Samsung Galaxy S5 to a special Samsung Mobile charger, but do not turn it on. In certain circumstances, charging the smartphone may take a little longer.
When your smartphone starts charging, a charging sign should appear on the screen. However, if nothing appears on the screen, the Samsung Galaxy S5 not charging issue is caused by a faulty charging cable or a problem with your smartphone, for example, the charging port is broken or twisted, or the charging contacts on your smartphone are not cleaned. So, that’s how to charge galaxy s5 with broken charging port
To test the charger, charge another Samsung smartphone using the same charger and see whether it works.
If the other smartphone is charging properly, the charger is working properly. You should now check your smartphone.
Examine your Galaxy S5’s charging port. Take a light, an amplifying glass, and a pointed wooden toothpick to inspect the charging port.
Check that the charging port is not twisted and is in the centre. If you discover that the port is twisted, carefully repair it with a wooden toothpick. Try to be cautious when doing so.
Make sure the charging connections are clean. Sometimes dust/dirt gets into the charging port and creates the problem. Insert a small needle into the charging port and clean it carefully so that the port is not twisted or damaged.
Solution No. 2
To resolve the Galaxy S5 moderate charging issue, download Galaxy Charging Current and verify that your smartphone is charging to its full capacity.
Solution No. 3
It is important to upgrade the programme whenever a new version becomes available since it might change a variety of difficulties. To accomplish this:
Connect to a Wi-Fi network.
Navigate to Settings.
Select About Device.
Then, select Software update.
Solution No. 4
Whether none of the above steps resolve the issue, boot your Galaxy S5 into Safe mode to see if any third-party programme is causing the problem.
In this mode, all third-party programmes will be temporarily disabled. The steps to boot your Galaxy S5 into Safe mode are as follows:
Switch off your smartphone.
Hold down the Power button.
When you see “Samsung Galaxy S5” on the screen, release the Power button.
After releasing the Power button, immediately press and hold the Volume Down button.
Try not to let go of the Volume Down key until your Galaxy S5 has finished rebooting.
The Safe mode will be shown in the bottom left corner of the screen.
Now, release the Volume Down key.
Plug in the smartphone in Safe mode and see whether it charges normally. If it does, then a third-party programme is the culprit, and you must either remove the applications one by one until the issue is resolved or do a factory data reset.
In any event, if the moderate charging issue remains in Safe mode, the only option is to perform a factory reset (clarified underneath). Back up all of your data first, because this method erases everything.
Solution No. 5
As previously said, executing a factory reset will destroy all of your information, data, personal settings, and third-party programmes, so make a point to back up everything important before proceeding.
Navigate to Settings.
Select Backup and Reset.
Next, if necessary, tick the following choices/options: back up my data, Backup account, and Automatic restore.
Now, select Factory data reset.
Reset the gadget
If you configure a PIN code, you will be prompted to enter it.
Continue by tapping
Select Delete All.
How can I tell if my Android charging port is damaged?
The damaged or broken charging port on your phone
- The pins in the phone charger port are broken. Similarly, if the pins within the port become damaged or deformed, proper charging becomes difficult.
- Phone Charger Port Debris
- Other Devices Can Use the Charger Cable and Adapter
- The phone charger adapter is defective.
- The phone battery is faulty.
Is it possible to repair a broken charging port?
Don’t worry, even severely damaged charging ports may be replaced. Indeed, if you are confident in your abilities, you can attempt the process on your own.
What is the best way to clean up my charging port?
Turn off your smartphone and clear up the charging port with a can of compressed air or a bulb syringe.
Blast a couple quick bursts of energy and watch if any dust falls out. When using compressed air, keep the can upright to avoid putting water inside the port.
How much does it cost to repair a charging port on a Samsung?
- Professional repair services range from $40 to $80.
- Depending on the model and service provider, phone repair businesses often charge between $40 and $80 to replace a broken Galaxy Note charging port. To get the greatest bargain, it’s a good idea to shop around.