Business is booming.

How To Fix A Charger Cord? 5 Quick & Easy Methods For Newbies

Have you ever thought about how to fix a charger cord? You’ve probably worn out so many power cables over the years that you’ve stopped keeping track. These cords tend to snap with repeated usage, seemingly because they were made to be as thin and delicate as possible.

Sadly, it also appears to make no difference whether you’re an iPhone or Android user. The charging cords that come with electronics rarely endure more than one or two uses, regardless of the manufacturer.

The connection between the charging head and the wires is usually rather weak, which is why charging cables tend to break so frequently. Further, many carelessly misuse their chargers, resulting in fractures and breaks that render the cable useless and prevent it from charging.

It’s excellent news that you might be able to fix your charging cord. This post takes a look at some of the methods you might potentially employ.

Just accept it as reality. Cables seem to fail at the most inopportune moments. If you follow these simple instructions, though, you may get a little more usage out of your most often used cords.

A malfunctioning charger is annoying and inconvenient whether you need to charge a phone, computer, tablet, or something else. You don’t need to be an electrician to check out a few different possibilities for a solution.

However, the wires we use on a daily basis—the ones that power our computers and smartphones—go through hell. They’re subjected to constant abuse from being twisted, pulled, and bent.

If you notice that one of your cables is showing signs of wear and tear, you may easily repair it with one of these methods.

Type Of Charger Cable Damage

Your cable is vulnerable to a wide variety of hazards. The damage may be small and easily repaired in some cases, but in others it may be more cost-effective to just replace the charger. Examine the level of damage before deciding whether or not to attempt repair.

Your charger is most likely to break. You may have a cable failure at any point along its length or in its vicinity to the plug. Any kind of cable, USB-detachable or not, is susceptible to this kind of wear and tear.

How to Fix a Charger Cord That Won't Charge Any More

Furthermore, your cable may rip a little where you normally bend it, but this will not compromise the cable’s performance. However, you shouldn’t disregard the problem, since doing so might lead to irreparable consequences.

Reasons Why A Charger Stops Working

In general, there are a few main causes for your charger to cease working:

  • The plug is either broken or does not work in the wall.
  • A broken power adapter.
  • The power connector to the gadget has been broken.

How To Fix A Broken Charger?

There are a number of things you may attempt to get your damaged charger functioning again, and while some remedies may need some rewiring, many won’t.

Make sure the outlet is turned on.

It’s important to check if the switch is engaged. Individual switches can be seen on certain European-style outlets. In American houses, electrical outlets may be controlled by a breaker, light switch, or surge protector. A breaker may need to be reset if it has tripped.

Make sure the cables are connected correctly. 

Verify that all cords are securely fastened. Remove all system cords, wait a few minutes, and then plug them back in again. Be sure to double check that your reseats are secure and your connections are correct before proceeding.

Look for lights.

Follow the glow. Does the status light on your faulty Mac charger come on when you use it? Similarly, battery packs and laptop chargers with status LEDs serve the same purpose.

Reboot the charging device.

Turn off and back on the charging gadget. Restarting the device can help fix charging detection issues because the device is responsible for most of its charging behaviour.

Try a different outlet

Switch to a new power source. Power outlets are sturdy but can occasionally malfunction. Read on for advice on using a multimeter to verify the functionality of a wall outlet.

Check for damage to the charger. 

Make sure the charger hasn’t been broken. Possible causes of electrical issues include exposed wires, insulation, and shielding that has been removed.

After you’ve plugged the cable in, jiggle it at both ends. If the cable’s copper wire is broken and the charger only works sometimes when you move it around, the cable has to be replaced. Get a new wire if at all feasible.

If there are bare or broken wires in a cable, do not try to jiggle it. An electrical shock is a possible consequence.

Check the components.

Make sure all the parts are in order. As a temporary measure, unplug all other devices from the outlet save the charger. This includes the adaptor, outlet splitter, power strip, or surge protector. The wall socket is probably fine if the charger still won’t turn on despite being plugged in.

Put the charger into the wall and see whether it charges; if it does, the issue is not with the charger itself but with one of the parts you took out. Put everything back together one by one until the machine crashes, then keep going. If you’re having trouble putting it together, maybe you might try moving or rearranging the pieces.

Check the fuses.

You might want to double-check the fuses. A flipped breaker can be found and reset by opening the fuse box. Commonly, all of the toggles in a given column or row will be set to the same position. In most cases, a fuse that has been tripped will have its handle pointing in the other way. Locate the fuse that protects the plug and replace it. It clicks and springs back into position.

A fuse box is used to protect electrical outlets in homes in nations that follow the American model. Plugs in other countries often have a fuse already installed. Do your research before undertaking any electrical repairs in a foreign place.

Clean the charging port. 

Purify the cord connector. If there is no audible “click” when you insert the charging cord, check inside the charger. Users of both Lightning and USB-C charging ports have reported issues with charging when foreign objects, like as lint or rice, become lodged in the connector. Plastic tweezers, a cotton swab, or a toothpick can be used to pick up trash.

Discard any metal objects before plugging them in. You can cause irreparable damage to your smartphone by inserting metal in the wrong orientation into the charging port.

Try a different cable and power adapter.

Make sure you’re using a high-quality cable and power adaptor. The charging cord is the primary cause of a malfunctioning charger. This is because the cable is subjected to the highest strain over time and thus fails first.

Not as frequent, but still possible, is damage to the charging brick that anchors the cord to the wall outlet. Switch to a new USB cable and adapter to see if it helps. Substitute components one by one until the problem is resolved.

Clear the USB port.

Disconnect the USB device. If a USB port isn’t making good contact because of shielding, cable design, port furniture, or any other physical barrier, removing the barrier may solve the issue.

If a USB port’s housing becomes permanently bent, you may simply bend back into shape the thin metal that makes up the enclosure. The little tongue within the charging port of a modern USB Micro or USB-C gadget is out of position, you may gently bend it back into place.

Make sure the power is turned off before touching any electrical components to prevent electrocution.

Check the battery’s age and health.

Investigate the condition and age of the battery. Sometimes the battery ends up lasting longer than the gadget does. Determine if the battery has reached the end of its useful life. Your laptop’s battery may be the source of the issue; if you can remove it, try replacing it. An older battery can also be adjusted to its optimal performance.

Check the charger compatibility.

Make sure your charger is compatible. It’s simple to make a mistake and connect a partially functional wire that seems like it should work. Unlike phone chargers, laptop adapters tend to be more particular.

In addition, you can’t use the full potential of your gadget without the proper adaptor and connection. Get a cable that works with your gadget if you’re having connection issues.

Test with a multimeter. 

Make sure it works with a multimeter test. You can rule out more serious issues by testing the cable and wall outlet using a multimeter.

  • Connect the probes to the multimeter, switch it to AC voltage mode, and then test the outlet by inserting the black probe into the neutral port and the red probe into the hot, or positive, side of the outlet. Check the cable if the outlet is functional.
  • Adjust the multimeter’s central knob to the resistance setting (Ohms, or ) to test the cable. Then, place the two probes of the multimeter on the same pin on opposite ends of the cable. If the reading on the multimeter is zero, the wire is good to go. If you see an infinite, the wire is damaged and has to be repaired or replaced.
  • To make sure the adapter is working, check it. Connect the adapter to the wall and use the multimeter’s AC voltage setting to test the contacts. There may be a problem with the adapter if you are unable to measure any voltage when connected to it.
  • Only the ground and voltage pins of a data cable, like a USB, may be examined. Find the power pins (often designated ground, GND, V+, or 5V) on a connection pinout.

How To Fix A Charger Cord? 5 Quick & Easy Methods For Newbies

Electrical tape

A small amount of electrical tape can be one of the most cost-effective solutions for a cable that is ready to fail. This is not going to be the most secure or aesthetically pleasing solution. Electrical tape, however, may be purchased for anywhere from $1 (£0.69 or AU$1.39) to $5 (£3.46 or AU$6.93) per roll.

Although properly wrapping the wire with electrical tape to strengthen it is effective, the best approach to keep it from being further damaged is to begin at the damaged section and move outward. Any damaged sections of cable are rendered inoperable by this method. Do not, however, count on it being that way indefinitely.

Shorten in size when heated

Heat shrink is a more permanent option. It’s more expensive and perhaps ineffective if the ends of the cable are much bigger than the cable’s diameter.

There is a wide price range for heat shrink tubing, from pennies to $30 (£20.71 or AU$41.59) for a variety pack, depending on the size and material.

A heat gun or hair dryer set to high heat can be used to activate heat shrink after it has been slipped over one end of a frayed cable.

After being heated, the tubing will contract and adhere to the cable, preventing further damage and providing reinforcement to the region.

Sugru

Sugru is useful to keep around for a variety of things, including repairing worn out wires. It’s a putty-like liquid that hardens into an extremely tough, rubbery polymer after sitting and curing for around 24 hours.

If you shape some Sugru to fit over the damaged region of a cable, it may be possible to keep the cable from being further harmed. However, the price of Sugru is not low. Sugru retails for between $9 (£6.21 or AU$12.48) and $12 (£8.29 or AU$16.64) for a set of three individual use sachets. Nonetheless, you can count on it being dependable.

What was once spring is now being used for something else

Removing the spring from a retractable pen, extending it out, and wrapping it around the cable to stiffen it towards one of its ends is a do-it-yourself option that could work for a time.

These springs aren’t extremely stiff, especially when they’re stretched out, so they won’t prevent the cable from being further damaged. Another option is to place a spring over the damaged region and then cover it with heat shrink tubing.

Incorporating both materials into a structure yields a more robust reinforcement at little additional expense.

Cable snatchers

It should come as no surprise that several solutions have been developed to combat the inevitable everyday wear and tear that leads to frayed wires. It’s also not shocking to learn how much money those items cost.

The TUDIA Klips are designed to shield a single Lightning cable and can be purchased for around $7 (£4.83 or AU$9.70) for a pair. At that price, you can save about $3.00 compared to purchasing an Apple-approved Lightning cable.

While their primary function is damage prevention, they will also serve their purpose if the ends of your cable (often the weakest link) have already begun to break. Place a Klip over the cable, bring it up to the plastic connector, then lock it in place by sliding the lock over the Klip.

It might be time for a change.

A new charger for a MacBook or PC may cost upwards of $80 (£55.24 or AU$110.90), but one of these repairs will only set you back a fraction of that amount. In such case, you should consider look into other possibilities before committing to a brand new charger.

 fix phone charger port

However, if a micro USB, Lightning, or USB-C cable breaks, it’s usually preferable to just acquire a new one instead of trying to fix it. Third-party alternatives to these cables are often available for about $5 (£3.45 or AU$6.93) and $10 (£6.90 or AU$13.85).

How To Fix A Broken iPhone Charger?

Buying a new Lightning Cable, the official Apple accessory for charging the iPhone, is not cheap. Saving money and increasing the life of your product are also possible outcomes of mending the cable.

Verify sure the cable is the source of the problem before devoting resources to correcting it. Problems with charging may happen for reasons other than the cable itself. This is what you need to do before you can apply a fix:

  • Plug something else into the outlet to make sure it works. It’s possible that the fuse for the plug has blown, rendering the new gadget or charger inoperable. The answer here is to change the fuse and reset the circuit breaker.
  • It’s possible that your Apple product is malfunctioning. Try connecting the cord to another Apple device if you have one on hand. If the second gadget begins charging, the first one has a problem that has to be looked at by an expert.
  • Replace the cable adapter with a different cable and see if it helps. If that cable is also ineffective, the adapter may be malfunction.
  • If you’re using a charger, be sure it works with your gadget.
  • Check the charging port of your smartphone for debris, such as lint. If you have access to some tweezers, use them to pull out the obstruction.

Once you’ve checked all of these things and determined that the problem isn’t with any other devices, you can move on to the iPhone’s cord.

Several potential solutions exist for attempting to repair the cable.

The primary method makes use of electrical tape. Verify that the cable is not damaged in any way, especially where it attaches to the device’s charging port.

Once the crack has been located, it may be repaired by wrapping electrical tape around it. In some cases, this is all that’s needed to restore functionality to the cable.

Two possibilities exist if you’d want a longer-lasting answer:

  • Get out the heat gun and some heat-shrinking tubing.
  • Fix the wires with a soldering iron.

How To Fix A Broken Android Charger?

Cables for charging Android devices are less proprietary than Apple’s Lightning Cables, but they serve the same purpose. Thus, an Android cable may benefit from some of the aforementioned adjustments.

Using electrical tape or heat shrink tubing to organise your Android wire is equally as efficient.

The solution is used to repair a broken cable or to reinforce an existing connection between wires.

Quick Fix for Loose Charger Port on Android and iPhone

The same soldering technique used for an Apple charger may be used for an Android one. On the other hand, the interior wires of the cable are coloured differently, and this is the main distinction.

Every genuine Apple cable has distinctively coloured wires—red, white, green, and black.

This may not always be the case with Android chargers, especially if you are using an aftermarket charger. Therefore, you need to take extra precautions to solder the right wires together.

Let’s Fix A Loose Charger Cord

The effort required to repair your charging cord might influence your decision to do so.

Electrical tape or heat sink tubing can be used as a quick and cheap modification that might add months to the cable’s useful life.

Securing it with solder is a more long-lasting option. You’ll need a few tools and some soldering experience to reconnect the fragile wires in your charging cord, though.

This may be too much of a hassle for you, and you may decide to just get a new cable instead.

As always, the decision is yours to make.

Should you attempt to mend a damaged charging cord for your electronic device? Or would you just get a new one and get rid of the old one? Do any of these ideas pique your interest enough for you to try them out?

It’s possible you know of other ways to address the issue at hand. Tell us about it in the feedback form below, whatever the situation may be.

FAQ

Why my iPhone charger isn’t doing its job?

A broken charging cable or USB adapter might be the blame for your iPhone’s inability to charge. The charging port on your iPhone might be broken or clogged with trash. Another possibility is that you’re employing a non-Apple-approved charging accessory.

Where is the problem with my wireless charger?

It is possible that your wireless charger is not properly connected to an electrical outlet, that your phone cover is interfering with the charging process, or that your smartphone is not positioned correctly on the wireless charger. There’s also the possibility that your wireless charger isn’t strong enough for your smartphone or isn’t compatible with it.

What’s wrong with my MagSafe charger?

There might be a number of causes for your MagSafe charger to stop functioning. It’s possible that your computer needs an update to improve communication with your power adapter, that the AC plug is broken, or that debris is blocking the power connection.