How To Fix A Loose Charger Cord? 5 Quick & Easy Steps To Fix It
Have you ever thought about how to fix a loose charger cord? When you try to charge your phone, does it seem like the cable isn’t fully inserted? Perhaps it is a touch loose or wobbles back and forth. When it first starts charging, it may halt if you bump it, or it may stop charging entirely. Isn’t it annoying?
We all have tiny USB cords that become frayed over time. This makes maintaining the connection difficult. Learn how to easily repair a loose USB cable at home. It is really simple to repair a micro USB cable so that you may charge your phone and transfer data to your PC.
I know how you feel since, during the first two months, all of your USB cords worked well. Then things become a bit “loose,” and you must set your phone in a position to avoid small movements, which would otherwise result in the phone not charging.
Similarly, while connecting a mobile device to a computer via a USB connection and transmitting a huge file, avoid making any movement. Because this causes your computer to ping incessantly, indicating that the connection has been lost, and file transfer to cease suddenly.
In rare circumstances, USB wires become so loose that they cannot be held in place. What if you could just restore those frayed micro USB wires to their original state, or at the very least make them link securely?
Back in 2016, a similar tutorial to help you fix loose USB ports was released; you may refer to that post to make your USB ports tight enough to hold whatever you attach.
To begin, take note of the pin in your USB cord; most cables have two pins, as seen in the illustration below. You don’t need any special tools to fix them and secure them when linked.
The image below depicts a Micro USB cable that may be repaired in a matter of minutes. I’m afraid I can’t say the same with USB type-c cables; don’t they get loose with use?
Perhaps they do. Dig in there with anything tiny to get all the pocket lint out of the Type-c port. The cables will then fit snuggly once again.
Our cell phones have become an integral part of our daily life. Most of the time, our phones include a wealth of personal and even professional information that we require to carry out our daily tasks.
Our phones perform a variety of things for us and are a vital part of us, from setting alarms to building a to-do list, writing documents, communicating with family and friends via messaging and social media applications, to all types of virtual audio-visual entertainment.
When we use our phones, the battery might run out and need to be recharged in order to get the most out of them. What should you do if you connect your charger to the charging port of your phone but it does not charge?
Before you panic or plunge into a frenzy, consider the following procedures to repair the mobile phone charging port.
How To Fix A Loose Charger Cord?
Experiment With A Different Power Source.
The problem with your phone not charging might be caused by the power outlet to which the charger is attached. Connect your charger to a different outlet.
If you were charging via an extension box, you may now charge straight from the wall. If you’re charging on a wall socket, switch to another. If you were charging using a USB port on your computer, try charging via another port or a wall adapter.
If your phone begins to charge, you’ve discovered the source of the problem. You just need to contact an electrician to repair the defective electrical adapter, get a new extension box, or have your computer’s USB port repaired.
Examine The Charging Cord
The most common cause of your phone not charging when plugged in is a faulty charging cord. Charging cables go through a lot of wrapping and unwrapping, twisting and untwisting, especially when they are transferred frequently, since some of us can’t live without our chargers.
These can cause the charging wire to be destroyed. Change your charging cord and see whether your phone charges; if it does, your charging cable was defective.
Examine The Charging Adapter
If you’ve changed the charging cable and the phone is still not charging, and you’re confident that the charging cable is not damaged, you should check the charger adapter.
Remove the charging cord and inspect the connected port; does it smell burnt? Is the connection port rusted? When connected, does the charging cable tremble or fail to attach properly?
The charging adapter should then be replaced. Also, avoid charging your phone with just any charger adapter or charging cable; each phone has a certain voltage need that must be met in order to charge it successfully, and your charger must fulfill these requirements. Replace your charging cable only from reputable businesses such as Carlcare offices that offer genuine supplies.
Turn Off Your Phone.
Sometimes your phone is receiving electricity from your charger and your wall adapter is operating properly, but there is a malfunction in your phone software recognizing that the phone is charging, therefore the battery status bar does not update.
Switching off your phone could help. You may also do a hard reset by pushing the volume and power buttons simultaneously. Then try charging it; if it reacts to charging, that might be the problem.
Examine The Charging port on your phone.
We frequently store our phones in pockets and other areas where the charging port is not protected by a protective pouch. Dirt and debris can enter the charging port and prevent the charger from fully connecting to the phone. Look into your phone’s charging port using a light source.
If you notice any visible dirt or debris, utilize a soft toothbrush and clean the phone charging port. You may also accomplish this using a cue tip.
Toothpicks and paper clips should be avoided. A toothpick may easily be broken into your charging port, perhaps damaging it. Because paper clips are metallic, they may carry electricity. They are also sharp and can injure you. If you can charge after clearing debris and grime, you’re fine to go.
What Are You Gonna Need To Fix A Loose Charger Cord?
A razor-sharp needle.
Yes, that is all. Nothing else.
Step 1: Insert a needle into the USB cable pin and gently pull it out. Look, you need to lift the pins, but not too much or you’ll make things worse.
When a pin gets little out of your cable, you may easily move it to another location. When charging your phone or downloading data to your PC, any minor movement will result in a continuous stream of pings from your computer informing you that the cable has been unplugged.
Step 2: Your objective should be to lift them to the greatest 45-degree angle possible. After that, you can go to the next stage.
Step 3: Now that the pins have been appropriately lifted, you must ensure that they do not revert to their original shape quickly or on the first attempt. To prevent pins from returning to their original position, insert a needle vertically between both pins. Allow for at least 5 minutes. Repeat the instructions if you believe the USB cable is not firmly connected and if even the slightest movement disrupts the connection.
Why Is the Cable Not Locking In With the Port?
The little pins on the wire are not doing their job correctly, which is why your charging cord is loose. Prolonged usage of the charging cord will ultimately shift the pins, resulting in a loose connection.
How To Repair A Loose Charger Cord At Home?
To begin, locate the small little prongs on one side of the connector, at the front of the cord. You’ll note that they hardly emerge from a frayed wire. These are the pieces that should fit into the two holes in the charging port and lock it into place.
To begin troubleshooting, check sure the cable is disconnected. Now, using a very thin screwdriver or a knife, pull the front end of these prongs back out. What you want is for these to stand out. Lift the hook up using your knife, needle, or screwdriver.
If you execute it correctly, you will see that the front tip of the prongs will be exposed. These will now protrude further and hence latch into the holes when you put the charging wire into the charging port. Simply insert the screwdriver under the hook and spin it to pull it out.
5 Easy Methods To Fix A Loose Charger Cord
- You may repair a damaged charger by putting electrical tape to frayed cable segments, restarting your devices, and other methods.
- Your charger may not be correctly attached, or it may be too filthy to connect.
- But it may also be because the power source, rather than the charger, isn’t functioning.
- Whether you’re using a smartphone for business or pleasure, a faulty charger will disrupt your plans.
However, before you run out and buy a new charger, there are a few ways you may attempt to solve it. To properly troubleshoot, you only need to be aware of the most typical difficulties that may arise.
Here are some pointers to help you repair a damaged charger.
If your charger isn’t operating properly, try these solutions.
Examine The Outflow
Sometimes the issue is with the outlet rather than the charger. To begin, you should:
- Attempt a different outlet.
- If your outlet has a reset button, press it.
- In your fuse box, reset a tripped breaker.
- Check that the light switch that controls the outlet, if applicable, is turned on.
- Examine your cable and port.
If The Cable Connections Aren’t Correctly Connected, They Might Be The Root Of The Problem.
To rule it out and maybe resolve the issue, unhook the cord from both the charging port and the device and then reconnect them.
Check to determine if the connections are secure and fully linked, and if the problem has been resolved.
Examine The Cable For Frays.
If your cable is frayed or has exposed wires, it’s time to replace it.
If you don’t have access to a new cable straight soon, you can cover the frayed area using electrical tape. That should get it working again until you receive a new cable.
Important: Frayed wires pose a risk of electrocution, so don’t wiggle it around when it’s plugged into an outlet. Make sure the cord is disconnected from the wall socket before applying the tape.
Restart Your Device.
There’s a reason why one of the most popular replies to a computer issue is to ask whether you’ve tried turning it off and on again. Sometimes that’s all you need.
And, whether you’re using a phone, computer, or tablet, this approach might come in handy if your gadget is having trouble identifying the charger.
Clean The Charging Port On Your Cellphone.
Dust and filth may quickly accumulate in your device’s charging port, causing problems with how your charger performs.
If you have an iPhone or iPad, for example, some compressed air and a toothpick can help you get things back on track.