Business is booming.

How To Fix USB Cable Not Charging Problem? Charging Issues Resolved

Have you ever thought about how to fix the USB cable not charging problem? If your battery isn’t charging properly, don’t assume your phone charger or battery is faulty. According to my own experience, the problem – and solution – may be a lot easy than you believe.

Is your phone not charging? It may not be broken; instead, the charger may be at blame. This is how you figure out what’s wrong.

Nothing is more terrifying than plugging in your phone and seeing the “phone is not charging” message. However, while many individuals rush to the service center when they notice a charging problem, the solution is likely to be simpler than you believe.

The problem might be as simple as dirt in the charging port or the power socket to which your charger is attached. However, the issue might occasionally be more significant, such as a dead battery. Even so, they are frequently repairable.

Read on for a list of the seven most frequent reasons your phone won’t charge or charges slowly (and with solutions!).

USB cables appear to be lifelines for all things device-related, including charging, data transfer, and power delivery.

So it’s a major stumbling block when your USB cord suddenly stops working. It’s usually preferable to have a cable that works properly and is compatible with your devices, but like any produced thing, your USB cable might fail, which can be quite annoying.

When USB cords are physically damaged, they usually stop operating (internal wires get bent or broken). Cheaper cables are constructed of inferior materials and are not as dependable or safe (especially for charging). If your cable breaks, you can fix it, but replacing it is significantly easier.

Whether you’re not sure what to do when this happens, stay reading because we’ll go over the following topics: why cables go bad, how to identify if a cable is operating properly, how to repair them, and why inexpensive cables are not safe, and what to do if you can’t fix your broken cable.

How To Fix USB Cable Not Charging Problem?

1. DIY USB port repair

Doing some basic hardware repair on your own is usually the quickest, easiest, and most effective option. The USB port and the micro USB charger may not be making proper contact due to a manufacturing issue or because of frequent insertion and removal of the charging wire.

Just power down your gadget, take out the battery (if you can), and use a little object like a toothpick to “lever up” the tab within the USB port. Carefully and gently remove the battery and then reinstall it and reconnect it. In nine cases out of 10, this is sufficient.

2. Take out the candy wrappers and dust

I was wondering whether you ever put your phone in your pocket while wearing pants. If this is the case, lint in your jeans’ pockets might be to blame; we’ve lost count of how many times this has been the cause of intermittent USB charging.

In the past, we’ve seen phones whose charging ports were completely blocked by chocolate after being thrown into a purse with a bag of candies. Your USB connection can be restored by using a can of pressurised air to blast away the offending irritants.

Keep in mind that putting liquid on the device’s contacts in an effort to clean them can cause permanent harm. The connection is easily destroyed by water, cleaning solutions, and abrasive materials. In the same way, using a cotton swab, toilet paper, or cotton can not only harm the USB plug’s contacts but also leave behind lint. Some manufacturers propose using 70% isopropyl alcohol instead of water for cleaning solutions.

3. Connecting wires

The charger’s cord is the weakest link, not the adaptor that goes into the wall. The situation is especially precarious for Apple customers, who may only get 15 minutes of use out of their pricey (and proprietary) Lightning cords before they die. However, the constant bending and twisting that all cables endure eventually takes its toll. One more easy way to have a bad time when charging your phone is to use a different USB cable than the one that came with it.

Switching to a new cable to see if it solves the problem is the quickest approach to figure out which one is at fault. In that case, you know the original cable was defective. If it doesn’t, then we may cross off another suspect on the list.

4. Analyze a faulty adaptor

If you’ve already ruled out a faulty charging cable, you should try another possible culprit: the wall plug adapter, in particular if the cable may be unplugged from the socket itself. After repeatedly inserting and removing the USB cable, we have found that the USB port on numerous chargers gets somewhat loose.

If you want to rule out the chance that the cable or charger is defective rather than the device, try using the identical setup with another device. You could also check to see whether your wall socket is malfunctioning.

To rule out the smartphone as the source of the problem, you should also see if the charger and cord are compatible with it. The charger may not be able to charge the mobile phone’s battery at all, or it may charge very slowly if it can, because different models offer different combinations of voltage and amperage for different models.

5. Always prioritize safety.

Avoid charging your phone in damp or humid environments. Be careful of inexpensive third-party chargers, since the internet is rife with complaints of them going “bang” in the middle of the night or toasting iPhones. To be safe, any electrical equipment you purchase should meet or exceed all applicable safety regulations.

Why Do USB Cables Go Bad?

There are several potential causes for a cable to abruptly or gradually fail, assuming it wasn’t defective from the start:

  • The conductors inside the cable can be severed if it is repeatedly bent, folded, or pulled. If they fail, the remaining cables will be rendered ineffective.
  • Low-priced cables often have inferior construction and materials, so they won’t survive as long as their more costly counterparts. Poorly constructed cables break easily when bent repeatedly and are therefore less expensive.
  • Plugs and sockets can deteriorate with time, too. If they come loose, the resulting connections may be subpar.
  • In addition to putting strain on the charging line, using your gadget while it’s plugged into power might cause damage to the device itself.

How To Tell If A USB Cable Is Working Or Not?

You may test a USB cable’s functionality by charging a different device with it. Using this method, you can figure out if the gadget itself is malfunctioning or if the fault lies with the cord. If your cable is malfunctioning, you can determine that by following these troubleshooting steps:

  • If you plug in your device to charge and notice that it is taking an abnormally long time to do so, the problem may lie with the cable. It may take twice as long to charge your phone as it usually does, for instance.
  • Your cable is likely defective if, after inserting the plug into your device and plugging in the other end of the cable, the device loses connection (or fails to detect the connection altogether).
  • If the cable’s ends are unclean or rusted, you may assume it won’t transmit signals. It’s best to just get a new one instead of risking damaging the internal pins by trying to clean the old one. If you insist on trying to clean it, please take your time.
  • There’s no use in continuing to use a cable that has been clearly damaged or has several bends in it. The cable, the gadget, and even you, might be damaged by an electric shock or a small explosion if the cable is damaged.

How To Repair USB Cables That Aren’t Working?

If you are unable to immediately replace a broken cable, troubleshooting methods for fixing it may be your first priority. Changing out the cable is usually the best and most convenient option. Yet, if you’d rather not, you may try these alternatives:

  • Just snip off the frayed end of the cable, and you’re good to go (of course before you do this, you should have bought a pack of USB connector replacements).
  • Remove the outer sheathing from the cable to a depth of two inches.
  • Those insulation fibres should be trimmed down if they are still present.
  • The metal strands may be seen once the insulation is stripped away from the inner wires, which is roughly an inch in length (red, green, black, and white).
  • You should carefully twist the uncoated metal of the same hue at either end.
  • Completely concealing the tangled metal can be done using electrical tape.
  • The remaining three coloured wires should be handled in the same way, taking care to leave no bare metal exposed.
  • Wrap each one individually with electrical tape and then tape the bundles together.
  • The new connection must be plugged into the cables. The new connector’s datasheet or the retailer’s website can tell you which pin goes with which wire, if the original connector’s configuration is different.
  • Simply thread the wires back through the pins using the pliers, and the cable will be good as new.

Because of how time-consuming this procedure is, you should probably just buy new cables instead of trying to repair and recycle the old ones. Since they are so readily available and inexpensive, it seems pointless to go to such lengths.

Are Cheap USB Cables Safe?

What you’ve seen thus far are examples of the cheapest USB cables on the market, and although they may serve you well as a temporary fix, we strongly advise against using them on a permanent basis.

Most low-cost cables don’t even meet the most fundamental safety standards since their components are of lower quality.

Overheating can result from the use of low-quality cables, whose wires are either too thin or too thick to safely transmit the current through the cable.

how to fix usb cable not charging

Their vulnerability to sparking and catching fire stems from the fact that they can easily short out when exposed to dust, moisture, perspiration, or tiny debris.

Reason number two is why low-cost cables could not be risk-free: malfunctioning parts that cause electrocution. Keep in mind that a cable can carry hundreds of volts of electricity if it is not properly insulated.

Using a low-quality cable might shorten your battery and could harm your gadget. Poorly insulated, low-quality wires can snap without warning.

How To Know If Your USB Cable Is Cheaply Made?

If a cable has any of these characteristics, it is likely to be of poor quality.

  • The high voltage and low voltage components are not differentiated in any way in terms of their characteristics.
  • They aren’t adequately rated, and they lack suitable overload protection.
  • Voltage levels fluctuate dramatically, and there are significant spikes when being charged.
  • If the cable makes a lot of noise or prevents you from using your touchscreen, you can assume it is of low quality.

What To Do If You Can’t Fix A USB Cable?

If you find that your USB cable is broken and cannot be fixed, you have two alternatives. One option is to send your warranty card back to the maker to see whether it’s still valid. Alternatively, you might try taking it to a nearby shop to see if they can fix it.

how to fix usb cable not charging

The alternative is to go out and get another another cable. Repairing or recycling a USB cable doesn’t make it as reliable as a brand new one, and there’s always the risk that it’ll stop working properly again. It could be more cost-effective to buy a new one instead.

7 Reasons Your Charger Isn’t Charging Your Phone

1. You’re Using The Wrong Charger

If you use the improper charger, your phone may charge slowly (or not at all). This is because chargers are designed to match the amperage of the phones that come with them.

Furthermore, not all adapters are rated for the same amount of electricity. For instance, you may have a phone that supports rapid charging, but the adapter you’re using does not.

To charge your phone, use a regular charger. If it functions as intended, the charging problem is most likely due to an incompatible charger.

2. You Could Have Dirt Or Debris In The Charging Port

If you keep your phone in your pocket all the time, dust and lint are likely to creep into the charging ports. Power transfer will be slowed when foreign elements accumulate over time. If the dirt is too thick, the charging port may cease operating.

Use a magnifying glass and flashlight to see whether there is dirt in your phone’s charging port. Examine the port for any foreign particles and remove them. A toothpick, an antistatic brush, or a soft toothbrush can be used to remove the impediment.

Similarly, compressed air may be used to clean the port.

3. Your Phone’s Software Needs An Update Or A Rollback

In the event that hardware-based solutions do not appear to be effective, the issue most likely lies inside the software. Because software decides whether or not your device should be charged, it is an essential component of a good charging process. Consequently, if you haven’t updated the software on your phone in a while, now could be a good time to do so.

Because software problems might interfere with the charging process, your phone may not be able to charge even when it is actively being used if it has one. The good news is that this problem may be fixed by downloading and installing the latest updates, as system updates frequently contain fixes that make your phone better.

It’s possible that reverting to an earlier version of the programme will solve the problem. For instance, if the charge problem started occurring after an update to the system was installed, the issue may be caused by a flaw. In order to fix the problem, you might attempt to revert to a previous version if the manufacturer of your phone permits it.

4. You Have a Faulty Cable, Adapter, Or Power Outlet

One of the most common reasons of charging problems is a wire that has become broken during usage. There are a variety of ways that cables can become damaged, which can result in the wires becoming exposed or severed. In addition, there is a possibility that the cable has been severed or bent, which would explain why it is not functioning as planned.

In addition, an outdated cable might not be compatible with your phone in the first place. If you’ve had a phone for a number of years, the cord that came with it is probably frayed and worn out from constant use.

Switching out an older cable for a more recent cable will help simplify the process of diagnosing a damaged cable. If it works, you’ll know that the problem was with the cable you were using before because new cables are often more efficient.

If the issue does not appear to be with the cable, the wall adapter should be checked. For instance, when adapters age, the USB ports on such adapters become less secure. In a similar vein, there is a possibility that your phone is experiencing hardware incompatibility if you are not using an original adaptor.

Alternately, you might try a new power adapter that is compatible with your device, or you could switch to a different power source. It’s possible that the problem is with the power outlet that you’re attempting to charge from.

Charging problems can also be caused by power sources that aren’t very strong. For instance, USB ports on computers have a propensity to charge devices at a sluggish rate. You may remedy this problem by putting your phone into a wall socket using a charger.

5. An App Could Be Interrupting The Charging Process

When charging a device, having many power-hungry applications open at the same time might cause charging problems. This is due, in part, to the fact that some of the electricity is sent directly to powering the applications rather than the battery, which results in the battery of your phone charging more slowly.

how to fix usb cable not charging

Examine the applications that you seldom use and get rid of those that are causing the problems. It’s possible that solving this issue just requires closing all of the apps on the phone while it’s charging. Another typical approach is to charge the device while it is in aeroplane mode.

6. Your Phone Has Water Damage

Phone charging issues may be caused by water damage, whether it be a few splashes or a complete immersion. Some phone models (such iPhone XR and later) can detect wetness, auto-disconnect charging, and display a liquid-detection notice on your screen.

On the display of many smartphones, the presence of a water drop indicator indicates that the charging port has been contaminated by moisture. Leave the phone out in the open (preferably close to a window) for a few hours so that it can dry out and fix the moisture problem. In the event that the infiltration is severe, turn it off and position it so that it faces a fan.

7. The Battery In Your Phone Is Dead

The health of the battery in your phone is the primary factor in determining whether or not it will accept a charge. When batteries get older, they often lose some of their capacity to be completely charged. In addition, if the battery is all depleted, your phone will not turn on.

Some bad batteries are easy to identify because they begin to bulge or leak fluid as they get damaged. Other indications that the battery could be the source of the issue include the phone overheating, a battery that doesn’t charge all the way, and a battery that drains quicker than it normally does.

You may be able to examine the battery on your own, depending on the type of phone you have. If you possess a phone that has a battery that can be removed, for instance, you may try purchasing a new battery and installing it in place of the faulty one.

If, on the other hand, you have a more recent model that has batteries that cannot be removed, you will probably need to take it in to a service facility so that a trained professional can examine it.

On both Android and iOS, there are a number of different methods that you may check the status of your battery if you are concerned that it may not last for much longer.

Can’t Find The Reason Your Phone Won’t Charge?

Following the aforementioned steps should assist you in determining the underlying problem that is preventing your phone from charging properly. It is hoped that the options presented here will assist in rectifying the billing issue. But if you can’t figure out what the problem is or how to solve it, you might want to think about going to a service centre or purchasing a new phone.