In light of the fact that you are unable to use your computer if the battery on your laptop runs out, it is understandable to get concerned when your laptop charger not working. However, in many cases, you can determine why your laptop is showing “plugged in, not charging” and resolve the issue on your own by investigating the situation.
Please allow us to instruct you on how to cope with a laptop battery that isn’t charging while the computer is attached to it. These recommendations will be beneficial regardless of whether you have a Dell, Lenovo, HP, or another kind of computer.
Why is my Samsung laptop charger not working?
1). Check all physical cable if your laptop charger is not working?
Make sure you’ve covered the basics before moving on to more in-depth troubleshooting. Verify that your laptop’s charging port has been properly inserted into the charging cord.
Then verify its connection to the wall outlet, and if the present socket isn’t working, try a different socket. Consider using a wall outlet instead of a power strip if you’re presently using one.
Don’t forget to look for a loose connection on the AC adapter brick where the cable enters the device. It may have come free because someone tripped over it or because it was stretched over time.
2). Remove the Battery and Connect to Power
Once you’ve done that, you should test whether your laptop’s battery is still working before continuing. Your laptop’s battery should be removed completely if it is detachable. A few tabs on the bottom of your machine may be all you need to achieve this. Look up specific model instructions in the manual or online if you’re unsure how to proceed.
Always shut down your computer before removing the battery from the computer if it isn’t already dead. Disconnect the charger and any other devices that may be connected.
In order to get rid of any residual energy, press and hold the power button for a few seconds after the battery is removed. Afterwards, plug in your laptop’s charger and see whether it will switch on by itself.
If this continues to be the case, the problem is most likely with your battery. Ensure that the battery compartment is free of any debris before proceeding if required. Replacing the battery is as simple as aligning the connections and putting it back in its container. A dead battery is the most probable cause of your problem, therefore replace it right away if this doesn’t work.
It’s possible to take the battery out of a laptop that doesn’t have a removable one by opening the machine and removing it from the inside. However, doing so would almost probably void your warranty, and if you make a mistake, you might inadvertently do serious damage to your PC. Taking your computer to a professional who can evaluate the battery with skilled tools is the best course of action in these cases.
3). Make Sure You’re Using the Right Charger and Port
The next step is to make sure that energy is being routed to your computer’s laptop (and that there is adequate power).
Make sure your charger is plugged into the right port on your laptop before you do any further steps. Most laptops only have one charging port, however if you have a more current model, you may be able to charge through USB-C instead.
Utilize all of your laptop’s USB-C ports, since some of them may only be used for data transfer in this scenario. As soon as the computer is connected to the charger, it will display a little power sign on top of the connection.
Lenovo’s X1 Yoga has USB Type-C for convenient charging.
You should always use the charger that came with your laptop for the best results. If you use a fake charger, you run the risk of permanently damaging your battery. Your laptop’s charging speed may be very poor or nonexistent if the third-party model does not use the necessary power. When it comes to USB-C cables, some of them aren’t capable of charging laptops and should be avoided at all costs.
4). Review Your Cable and Ports for Damage
Even though you did a quick check for cable problems before, it’s a good idea to check the power cord once again. It’s possible that “plugged in, not charging” is the result of a defective power cord.
Check the whole length of your laptop’s power line for fraying or other damage. Check to see if any components are bulging or otherwise out of form by gripping and touching it. Additionally, if you notice any burning in the AC adapter section of your charger, this suggests that something is wrong with the box and you’ll need to replace it. If a charger becomes too hot or has a burning odour, immediately stop using it.
The charging port on your laptop should also be checked. You should be able to obtain a snug fit when you connect the charger. To see whether you can create a good connection, try jiggling it about a little. If the connection is shaky, try moving it around a little.
The port should be clear of any debris that might prevent you from making a secure connection. With a flashlight, check the port to determine if there is any built-up dirt or other debris that could be preventing the plug from working properly.
To clean it, use a cotton swab or a toothpick to remove any debris that may be present. Be careful not to press too hard, since you might damage the port’s internal components.
A Laptop’s USB Port for Charging
To prevent damage to the cable and port, it’s a good idea to allow some slack in your charging cord. There is no need to put extra stress on the charging port by doing this. It’s best not to let the AC adapter brick dangle over a table, since this can strain the connector and ultimately cause it to disconnect from the device.
5). Reduce Resource Usage
Even though your battery is plugged in, it may not be charging due of a software problem rather than a hardware one. It is conceivable that your charger is not charging the battery quickly enough if your computer is working hard.
Your computer’s fan may have to work harder to keep it cool if it gets overheated, which will use more battery power. Many power-hungry applications and processes running at the same time can drain your battery faster and drain it more quickly.
To see current resource use, open the Task Manager on Windows by pressing Ctrl+Shift+Esc on the keyboard or searching for it in the Start menu. Click More details if you need more information. The number of resources presently in use may be seen under the Processes tab.
It’s possible to keep track of how much time your computer spends connected to the internet using Windows Task Manager Network Usage (WMNU).
If you suspect that a certain programme is causing your charge issues, you may find relief by closing that programme. In the worst-case scenario, it’s best to shut down your computer and let it cool down naturally. To make sure your charger can keep up with the battery under typical conditions, switch on the computer after everything has returned to normal.
By following above methods you can easily fix Samsung Laptop Charger Not Working Issue.